Arogno 2
Description
A very old handwinding movement with cylinder escapement is the Arogno 2, which was made probably in the 1920ies.
On the movement side, you see the typical attributes of an old cylinder movement: Slanted bridges, a safety clutch in an antique shape, a non shock protected balance with long regulator arm on the cock and of course the gilt color of the plates.
Arogno 2 dial side
On the dial side, this unmarked movement offers a small surprise: Here, a yoke winding system is used already - without pin for function chance (winding vs. time setting).
Technical data
| Manufacturer: | Arogno |
| Caliber: | 2 |
| Size: | 9''' (measured: 19,6mm) |
| A/h: | 18000 |
| Number of jewels: | 10 |
| Escapement: | Cylinder |
| Shock protection(s): | none |
| Balance bearing / direction hairspring: | Counterclockwise |
| Moveable stud: | no |
| Adjust mechanism: | Long regulator arm |
| Construction: |
|
| Winding mechanism: | yoke winding system |
| References: | Flume: 1947 96 |