Slava 2414

 
Slava 2414 |

Slava 2414

Description

The Slava Caliber 2414 is a remarkable hand winding movement from russia, since it contains two mainspring barrels, which drive the minute wheel simultaneously. Together with the large Glucydur balance a good precision can be achieved.

Slava 2414: old version

old version

The rest of the movement construction is remarkable, too: The large center second wheel is directly driven and is located under a large bridge together with the anchor wheel. The rest of the gears are under a second bridge, which is located partially below the center second wheel. The date indication is realized by a quickset mechanism, where a spring is loaded between 10 and 12pm and at 12:00, the tension is unloaded with a lever, which advances the date ring one step.

Slava 2414: detail: date mechanism

detail: date mechanism

This movement is also available with weekday indication and selfwindig mechanism as caliber 2427.

Slava 2414: Slava 2414 dial side

Slava 2414 dial side

Technical data

Manufacturer:Slava
Caliber:2414
Caliber base:Slava 2414
Size:10 1/2'''
Height:3,80mm
A/h:18000
lift angle:49°
Number of jewels:19/21
Escapement:Pallet lever
Balance types:Glucydur anular balance
Shock protection(s):3 arms, russian
Balance bearing / direction hairspring:Counterclockwise
Moveable stud:yes
Adjust mechanism:Hairspring key
Construction:
  • lever
  • escape wheel, seconds wheel
  • third wheel, large driving wheel, large driving wheel
  • mainspring barrel, mainspring barrel
Features:
  • SCD (direct center seconds)
  • QG (date indication (aperture))
  • RDR (date corrector)
Mentioning in literature (years):1983
Hint: The jewel count, the types of balances used, and the shock protections employed refer only to the specimens held in the archive and are therefore not relevant for the precise identification of the movement.

Usage gallery

Slava 2414: Inturex gents' watch

Inturex gents' watch

Slava 2414: Slava gents' watch

Slava gents' watch

Caliber Family
Slava 2414